|
 | Note: Remember to use the white Information Key on the Front Panel to gain access to additional, important details about the current display message, such as jam clearing instructions and information about re-ordering Supplies.
|
| | Note: If you change the type or size of paper, you MUST specify the type and size on the front panel of the printer. |
 | Phaser® 6200 Transparency film is designed specifically to work with this printer's oil-less fuser. Using non-Phaser 6200 Transparencies might result in poor image quality and might damage the fuser. Damage caused by using non-Phaser 6200 Transparencies is not covered under the printer warranty, service agreement, or Total Satisfaction Guarantee. To order Phaser 6200 Transparencies, visit the Phaser® 6200 Supplies and Accessories web site.
Load Phaser® 6200 Transparency Film only in Tray 1 or the Multi-Purpose Tray - do NOT use Trays 2 or 3.
|
Please see Ordering Information for supplies, prices, and part numbers.
Loading Media into the Multi-Purpose Tray:
- If needed, open the Multi-Purpose Tray (labeled MPT) by pushing the handle down and out.
- If needed, adjust the width guides to match the size of the paper.
- Insert the paper, transparencies, or envelopes in the Multi-Purpose Tray. Load the side to be printed face down with the top of the page entering the printer first. Do not load paper above the fill line. Place envelopes with the flap side up and top of the envelope towards the right of the printer. (For A7 envelopes, place the flap side up but have the top of the envelope enter the printer first.)
- When the front panel prompts you and you haven't changed the type or size of paper, press the OK key to accept the current settings for type and size.
- If you have changed the type or size of paper:
- On the printer's front panel, scroll to Change by pressing the Down Arrow key, then press the OK key.
- Scroll to the correct paper type and press the OK key to save your selection.
- Scroll to the correct paper size and press the OK key to save your selection.
| | Note: To avoid possible print quality and paper feed problems, always make sure the tray's paper type setting matches the type of paper loaded in the tray. |
Printing from the Multi-Purpose Tray:
The following movie provides instructions for printing from the Multi-Purpose Tray. This movie is in a Flash movie format and Requires the Macromedia Flash Player
|
